1. Convert to base units
rad/s = input value x input unit factor
Every supported angular velocity unit is stored as a factor relative to radians per second.
Mechanical unit converter
Convert angular velocity units for shafts, motors, gears, turbines, rotating equipment, and dynamics calculations.
Live angular velocity conversion
Enter a value, choose the starting unit, and select a target unit. The full angular velocity conversion table updates automatically.
Converted value
All units
Compare the entered value across radian, degree, revolution, rpm, and hertz rotational speed units.
Common conversions
| Conversion | Factor | Typical use |
|---|---|---|
| rpm to rad/s | rad/s = rpm x 2 pi / 60 | Motor and shaft speed |
| rad/s to rpm | rpm = rad/s x 60 / 2 pi | Drive and gearbox calculations |
| Hz to rpm | rpm = Hz x 60 | Rotational frequency |
| rev/s to rad/s | rad/s = rev/s x 2 pi | Dynamics |
| deg/s to rad/s | rad/s = deg/s x pi / 180 | Controls and simulation |
| rpm to Hz | Hz = rpm / 60 | Frequency checks |
How it works
rad/s = input value x input unit factor
Every supported angular velocity unit is stored as a factor relative to radians per second.
target value = base value / target unit factor
The selected result and table values are calculated from the same base value.
rounding depends on scale
Very small and very large values use compact scientific notation to stay readable.
FAQ
Multiply rpm by 2 pi / 60 to convert to radians per second.
Multiply rad/s by 60 / 2 pi to convert to rpm.
For rotational speed, 1 Hz corresponds to 1 revolution per second.
Related
Convert acceleration units including m/s², ft/s², g, and Gal.
Convert angular acceleration units for rotating systems and dynamics calculations.
Convert density units including kg/m³, g/cm³, lb/ft³, and lb/in³.
Convert joules, kilojoules, calories, BTU, watt-hours, and other energy units.
Convert force units including newtons, kilonewtons, pound-force, and kilogram-force.
Convert mass moment of inertia units for rotating bodies and mechanical systems.
Convert pascals, bar, psi, atm, torr, and other pressure units.
Convert hertz, rpm, rps, and related rotational frequency units.
Convert torque units including N·m, lbf·ft, lbf·in, and kgf·m.
Tell us what would make EngLab more useful for your engineering work.